Accessories for IKEA's Skådis pegboard, sized to your actual stuff instead of whatever IKEA sells. Six types share one proven mounting peg: flat hooks for tools and cables, round Ø4.3 J-hooks like IKEA's own, open bins for pens and parts, scoop-front drop bins you can dig screws out of one-handed, shelves with an optional front lip, and tool holders with a row of round holes for screwdrivers. Set the width and the pegs place themselves on the board's 40mm grid — wide accessories get a peg at each end, drop bins auto-count one per 40mm, or turn on all-grid pegs for heavy loads. The drop bin's front opening dips 20–50% of its height (30% lets a thumb in) and dividers split it into equal compartments. Retainer bumps grip the board so things don't lift out when you grab them one-handed. Print tip: exports come pre-rotated to print face-down with the pegs up — the peg wedge's 45° underside makes the part self-supporting. Round hooks export upright instead; lay one on its side in the slicer if it'll carry real weight. PETG flexes nicely for the retainer bumps.