The cutout is pre-warped by the projection math, so the plant lands on the wall undistorted. Scoot the pot against the wall.
130mm
About this tool
Shadow Lamp turns a motif or name into a wall-projection lamp: a printed stencil plate stands off the wall, an LED tealight slots in behind it, and the cutout throws a magnified light figure across the wall — a dark silhouette in a halo of rays, or a glowing cutout shape.
The live 3D room preview shows the real throw. Projected Height is the headline number — the optics magnify the stencil roughly 2.7x at default spacing, and Wall Standoff changes that magnification. Light Fit sizes the holder for a standard 39mm LED tealight.
Print the plate flat in an opaque filament — light leaking through thin bright walls washes out the projection. LED tealights only, never a flame.
3D Preview
Drag to orbit · this is the throw your print will make
Cactus
⌀130mm pot lid|throws ~160mm up the wall|2 parts · ⌀39mm LED tealight
pre-warped cutout (undistorted throw) · tealight stands on the pot floor · prints support-free
Colorize
Colors
Uses a standard ⌀39mm LED tealight — drop it in flame-first like loading a torch. Dark, opaque filament throws the crispest projection. Adhesive pads go on the three feet. Flameless only.