Pet Bowl Stand builds an elevated feeder sized to bowls you already own. Measure a bowl's rim and the top plate gets holes that cradle it exactly; height presets run from cat to large dog, with slab or A-frame legs and the pet's name on the front rail.
Bowl Rim Diameter is the critical number — measure the outer rim. Lip Overlap sets how much shelf the rim rests on: more is more secure, less makes bowls easier to lift out for washing. Height should put the bowl around the pet's lower chest.
On large-format printers the stand prints in one piece; on standard beds, switch to the flat slot-together parts mode. PETG resists water bowls and food spills better than PLA.
3D Preview
Drag to rotate · Scroll to zoom
BISCUIT
358 × 184 × 90 mm|2 bowls · ⌀146 openings|too wide for one piece — use the flat-pack export
Bowl rim ⌀160mm rests 7mm on the plate · slab legs · flat-pack pieces glue square with slot-tab joints
Colorize
Colors
PETG shrugs off water bowls and daily washing better than PLA. Wipe, don't dishwasher.